A registry listing is a starting point. CEC inclusion is not nationwide installation approval. Confirm the exact model and configuration with your utility and local authority.
How to use this dataEquipment overview
4.8 kW, 208 Vac Grid Support Utility Interactive Inverters
The figures below refer to SBSE4.8-US-50 {208V}. Use the configuration table for other variants.
- Continuous AC output
- 4.166 kW
- Nominal AC voltage
- 208 V AC
- CEC weighted efficiency
- 97 %
- Technology
- Hybrid inverter
- UL 1741 SB in CEC source
- Reported
- CEC source lists
- Solar + Battery
Specifications are reported in the CEC source; SolarApprovals has not independently tested this equipment. A missing value does not mean zero or a failed certification.
Exact configurations
CEC annotations in braces identify the listed configuration and are not part of the manufacturer’s model number. Variants share this canonical page.
| CEC model / configuration | Continuous AC output | Voltage / display | Observation | Compare |
|---|---|---|---|---|
| SBSE4.8-US-50 {208V}Solar_Inverters row 1731 · Battery_Inverters row 869 | 4.166 kW | 208 V AC | Listed in CEC | |
| SBSE4.8-US-50 {240V}Solar_Inverters row 1732 · Battery_Inverters row 870 | 4.8229 kW | 240 V AC | Listed in CEC |
Source specifications and conditions
Additional source information for SBSE4.8-US-50 {208V}. Qualifiers, reported control modes and required devices are retained as written. Power-control listings do not establish arbitrary battery/inverter pairings.
- Built-in meter
- N
- Firmware version(s) tested
- No Information Submitted
- UL 1741 SA certificate date
- No Information Submitted
- UL 1741 SB certificate date
- [2/13/2024]
- CSIP conformance as reported
- Y*
- UL 1741 SA certifying entity
- No Information Submitted
- UL 1741 SB certifying entity
- UL
- CEC grid-support listing date
- 2024-04-02
Use the source row references above to inspect the conditions for each other configuration.
Documented compatibility
For the four US models named in this document: battery BMU firmware ≥ 3.23, BMS ≥ 3.28, inverter firmware ≥ 3.06.15.R. Use the corresponding SMA-SBSE-3.8/4.8/5.8/7.7-ESS-HVL system designation and the specified shielded CAT5e-or-better communications cabling (maximum 10 m between nodes). The manufacturer installation instructions and project requirements still apply.
Manufacturer evidence · Version 1.1, pp. 2–5; approved-battery table p. 3Checked Sep 21, 2026
Registry observation history
Dates show when SolarApprovals observed a status. The first observation is not the original CEC listing date. History begins with our first import.
- Sep 21, 2026 · California Energy CommissionFirst observed: Listed in CECSBSE4.8-US-50 {240V}
Archived CEC source - Sep 21, 2026 · California Energy CommissionFirst observed: Listed in CECSBSE4.8-US-50 {208V}
Archived CEC source